Foam Boards

Guide from
£19.99
excl. VAT · final price depends on options
Foam boards in A4–A0. 3mm or 5mm thickness. Single or double-sided. 1–30 copies. Lightweight for indoor displays and presentations.
Foam boards in A4–A0. 3mm or 5mm thickness. Single or double-sided. 1–30 copies. Lightweight for indoor displays and presentations.
Configure Your Print
Select your options below
Size:
A0 (841mm x 1189mm)Paper Finish:
MatteThickness:
3mm FoamexPrinting Sides:
Single-SidedQuantity:
1Lamination:
NoneDrill Holes:
NoneTurnaround:
2-3 Working DaysBlank artwork templates
Download a blank 841 × 1189 mm template and check your artwork against the bleed and fold guides. InDesign, Illustrator and Acrobat.
Upload Your Artwork
Add one or more print-ready files before you add to basket — a front and a back, or several designs for the same product. Every file stays attached to this order so we check and print the artwork you sent.
Drag and drop your artwork
or click to browse. You can add several files.
PDF, JPG, PNG · up to 10 files · 50MB each
This option is not available
Pricing has not been set for this combination. Please contact us for a quote.
Total price
—
Excl. VAT
Need help? Contact our team
Foam Boards overview
Foam boards (foamex) are rigid PVC boards with a smooth surface for sharp, close-up display graphics. They are light enough to hang with sticky pads or screws.
Choose A4 to A0, 3 mm or 5 mm thick, with optional lamination and pre-drilled corners.
Key features
- Rigid, smooth board for close-up displays
- 3 mm or 5 mm thick
- Optional pre-drilled corners and lamination
- A4 to A0, single or double-sided
Foam Boards specifications
Every option below can be chosen in the configurator above.
- Sizes
- A0 (841mm x 1189mm) · A1 (594 × 841mm) · A2 (420 × 594mm) · A3 (297 × 420mm) · A4 (210 × 297mm)
- Paper / material
- Matte
- Thickness
- 3mm Foamex · 5mm Foamex
- Printing
- Single-Sided · Double-Sided
- Lamination
- None · Gloss · Matt
- Drill holes
- None · Top 2 Corners · 4 Corners
- Quantity
- 1 – 10
- Turnaround
- 2-3 Working Days
Preparing your artwork
- Supply artwork at the actual print size with 3mm bleed in CMYK colour mode.
- Resolution: 150–300 DPI at final print size. Foamex boards are often viewed at close range — higher resolution matters more than for outdoor correx signage.
- Foamex is available in 3mm and 5mm thicknesses. Specify which you need when ordering.
- For wall-mounted foamex, consider whether you need pre-drilled holes or self-adhesive backing applied — contact us if you need these options.
- Avoid very thin fonts or fine lines — while foamex reproduces detail well, very fine elements may not hold at large sizes.
- Embed fonts or convert all text to outlines before exporting.
File checklist
PDF, JPG or PNG · up to 10 files, 50MB each · 300 DPI · CMYK · 3mm bleed. Every order gets a free artwork check.
Blank artwork templates
Download a blank template for this product and lay your design into it. The page is the flat size we print, with 3 mm bleed, a dashed safe area and fold or perforation guides where this product needs them. The template follows the size and sides you have selected above.
This template
- Flat size: 841 × 1189 mm
- With bleed: 847 × 1195 mm
- Bleed: 3 mm
- Single-sided
What the marks mean
- Blue band — bleed, trimmed off after printing
- Dashed line — keep text and logos inside it
- Pink line — crease
- Black dashed line — perforation
Before you upload
- Use CMYK colour. RGB files are converted and can shift.
- Images at 300 dpi at print size. Outlined or embedded fonts.
- Put artwork on the Artwork layer. Delete or hide Guides before you upload.
- Extend backgrounds 3 mm past the trim into the bleed. Keep text and logos inside the dashed safe area.
Turnaround & delivery
Foamex boards are typically produced in 3–5 working days from artwork approval. Boards are packaged carefully for transit to all NI postcodes.
2-3 Working Days
Courier delivery
Free over £75, otherwise £6.50 (excl. VAT)
Free collection
From our Lisburn print shop
Common questions about Foam Boards
Foamex (PVC foam) has a dense, smooth surface ideal for close-up indoor viewing and premium display applications. Correx (corrugated plastic) is lighter and better suited for outdoor temporary signage where viewing distance is greater.
We offer 3mm and 5mm foamex. 3mm is standard for most exhibition and display applications. 5mm is heavier and more rigid, useful for large panels that need to remain completely flat when wall-mounted.
Yes — foamex boards can be drilled and screwed directly to walls, or fixed with strong double-sided tape (available from DIY stores). Contact us if you need pre-drilled mounting holes.
Foamex can tolerate short-term outdoor use but is primarily an indoor substrate. For longer-term outdoor signage, correx board or aluminium composite would be more appropriate.
Standard foamex sizes are listed on the product page. For larger custom sizes, contact us and we will confirm what is achievable.
This combination isn't priced yet. Contact us for a quote.
